Tonghua JH Oxygen Lance Tip

Desulfurization Lance Tip

Desulfurization Lance Tip

Key benefit: The desulfurization lance tip is the working end of the lance used for hot metal desulfurization pretreatment. Before the hot metal goes to the converter, the lance is lowered into the torpedo ladle or iron ladle and blows a desulfurizing powder — lime, calcium oxide, magnesium, calcium carbide or soda ash — into the melt on a carrier gas of argon or nitrogen. The powder reacts with the sulphur in the iron and carries it into the slag, so the converter receives a lower-sulphur charge.

Description

Overview

This is a powder-injection lance tip for hot-metal desulfurization pretreatment — not a standard oxygen lance tip for converter steelmaking, and not its sister dephosphorization lance tip, which removes phosphorus in the converter. The desulfurization lance tip is the working end of the lance used for hot metal desulfurization pretreatment. Before the hot metal goes to the converter, the lance is lowered into the torpedo ladle or iron ladle and blows a desulfurizing powder — lime, calcium oxide, magnesium, calcium carbide or soda ash — into the melt on a carrier gas of argon or nitrogen. The powder reacts with the sulphur in the iron and carries it into the slag, so the converter receives a lower-sulphur charge.

Manufactured by Tonghua JH, the lance tip is a steel pipe lance with a refractory castable lining on the working section. The lining is cast from a bauxite, fused mullite and andalusite aggregate with heat-resistant steel fibre, in two formulations for hot metal above and below 1,320 °C, and it is rated to over 1,800 °C refractoriness so the tip survives repeated immersion in the melt. The nozzle at the tip is available as straight-through, L-type, multi-hole straight or multi-hole Laval type, to suit the injection practice.

Applications

  • Hot metal desulfurization pretreatment (torpedo ladle / iron ladle)
  • Powder injection of lime, CaO, magnesium powder, CaC₂, soda ash desulfurizers
  • Rotary magnesium injection desulfurization systems
  • Steel plants running hot metal pretreatment before the converter

Specifications

  • Application: hot metal desulfurization, iron temperature ≥1,320 °C and <1,320 °C (two lining formulations)
  • Desulfurizer: lime powder, CaO, magnesium powder, CaC₂, Na₂O, Na₂CO₃; particle size 20 μm–10 mm
  • Carrier gas: argon, nitrogen, or a mixture
  • Lance pipe: inner diameter 12–50 mm; wall thickness 3–10 mm; outer diameter approx. 100 mm; insulation layer 1–5 mm
  • Nozzle types: straight-through, L-type, multi-hole straight, multi-hole Laval
  • Lining: refractory castable, aggregate of bauxite, fused mullite and andalusite, with heat-resistant steel fibre; refractoriness over 1,800 °C
  • Injection rate: 0–100 kg/min
  • Dimensions: made to drawing, to match the ladle and the injection system

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.