Description
Overview
A special version of the standard converter oxygen lance tip, made for the early dephosphorization stage of the blow. The dephosphorization lance tip is a converter oxygen lance tip designed for the early dephosphorization stage of the blow. It differs from a standard decarburization tip in the nozzle: instead of high-Mach Laval nozzles built for deep penetration, it uses waist-type slit nozzles at a wider angle, giving a softer jet with a larger impact area. The soft blow melts the slag early, keeps the bath stirred without driving the carbon out too fast, and holds the phosphorus in the slag — dephosphorization with carbon retention, which is the point of the early blow.
Manufactured by Tonghua JH as part of our oxygen lance tip range, the tip is machined from the same copper and steel materials and to the same water-cooling standards as our standard BOF tips, with the nozzle geometry changed for the dephosphorization duty. It fits the same lance pipe and the same top-blowing practice as a standard tip, so a converter can switch between dephosphorization and decarburization tips without changing the lance.
Applications
- Converter early-stage hot metal dephosphorization (BOF)
- Double-slag and double-blow dephosphorization practice
- Vanadium-bearing hot metal and high-phosphorus hot metal
- Converters running a dephosphorization-first blowing practice
Specifications
- Type: converter oxygen lance tip for dephosphorization (BOF)
- Nozzles: 4–8 nozzles; waist-type slit nozzles, slightly expanding
- Nozzle angle: 12–20° to the tip axis; slit semicircle centreline angle 5–15°
- Outlet diameter: larger than throat diameter; outlet Mach number 1.5–1.8
- Working oxygen pressure: 1.0–2.0 MPa; oxygen flow ≤30,000 Nm³/h; stagnation pressure 0.4–0.8 MPa
- Tip outer diameter: 300–450 mm; nozzle throat diameter 20–65 mm; nozzle outlet diameter 22–67 mm
- Effect (published test data): dephosphorization rate up 3–8% vs standard tip; tip life up 30–50 heats vs standard tip
- Alternative: near-straight nozzle version, Mach 1.1–1.5, stagnation pressure 0.15–0.7 MPa, nozzle angle 10–14°
- Dimensions: made to drawing, to match the converter and lance






